Solar Road Stud Seasonal Maintenance Guide: Ensuring Road Safety and Efficient Operation

2024-11-14

0 views times

Share us:

To ensure traffic safety, various safety facilities are constantly being innovated, from small road studs to large street lights. They are stationed on the road silently to protect passing vehicles and pedestrians. With the continuous development of science and technology, these facilities are becoming more and more intelligent and practical with the support of new technology. Solar road studs are one of the road studs that combine solar technology. Compared with traditional road studs, they are brighter and have more prominent warning effects. They have gradually replaced the application of conventional road studs on the road. How should solar powered road studs be maintained to serve people better and longer? In the following article, let’s take a look at the maintenance focus of solar road studs in different seasons.

1. Maintenance of solar powered road reflectors in the spring

After the test of severe cold, spring is usually the best time to fully inspect and clean solar road studs. Since the low temperature in winter may cause the battery performance of solar powered road studs to decline, first check whether the battery is charged normally and whether the contact points are loose or oxidized, and then clean the solar panels to ensure that no dust or snow affects the reception of sunlight. Then you need to check whether the light source is damaged and clean the equipment thoroughly to prevent external factors from affecting normal use.

2. Maintenance of solar road studs in summer

Generally, the charging effect of solar powered road reflectors is better in summer because there is sufficient sunshine and strong sunlight. At this time, you only need to clean it regularly. However, high summer temperatures may affect the battery’s performance, so you should also focus on the performance and charging of the battery to ensure that the solar powered road studs can operate stably during continuous rainy days. In addition, high temperatures may cause the plastic case or other materials to age, so when maintaining, pay attention to whether the road studs have cracks, fading, or other damage.

3. Maintenance of solar led road studs in autumn

There are often fallen leaves, branches, or other debris accumulated in autumn, which need to be cleaned regularly to avoid affecting the solar road studs from receiving sunlight. In addition, you should prepare for the transition to winter and check the performance and charging of the solar road stud batteries in advance to ensure that they can withstand the upcoming cold weather.

4. Maintenance of solar road studs in winter

The severe cold in winter will affect the charging and discharging performance of the battery, and it is necessary to check the battery of the solar led road studs regularly for abnormalities. An important task in winter is to clean the snow or frost on the surface of the solar road studs in time to avoid affecting the performance of the solar road studs. Winter nights are longer, so you need to check whether the light source can be used normally. If there is a problem, you need to replace it in time.

Through the above introduction, we know that no matter in which season, the focus of maintenance of solar road studs is the performance of solar panels and built-in batteries. Only by ensuring that the charging and discharging of solar led road studs are normal and the light source is normal can they provide people with bright road signs and guidance at night or in other poorly lit environments and ensure people’s travel safety. Targeted maintenance of solar powered road reflectors according to seasons is also an effective way to extend the service life of solar energy.

info@nk-roadstud.com

+86-13602600950

Previous: How to Choose A High-quality Solar Road Stud Manufacturer?

Next: Reasons for the growing global demand for solar road studs

Inquiry

If you have any question or comment, please contact us without hesitation. We will reply you as soon as possible.( * is required information)

*Name:; *Email:; Phone:; Company:; Country:; *Message:

Hot Products

NOKIN Amber Raised Solar Road Stud Light For Expressway NK-RS-A6-1

2020-05-18

Body material: Aluminum(GB-ADC12)+PC(Japan Brand)
Power supply: USA Brand High Efficient Solar Panel
Battery: NI-MH1.2V/600MAH; Lithium battery3.2V/500MAH(Made in Japan);
Resistance: >30T
LED Color: White, Yellow, Blue, Red, Green
Size: L125mm*W107mm*H26+50mm

Heavy Duty Solar Road Stud For Sale NK-RS-X5

2020-05-18

Body material: Casting Aluminium alloy +PC
Power supply: 5V/80MAH Mono crystalline silicon
Battery: Lithium battery3.2V/1000MAH
Resistance: >40T(can be installed in the middle of road)
LED Color: White, Yellow, Blue, Red, Green
Size: φ125*50mm

Round PC Solar Road Stud Light NK-RS-K1

2020-05-18

Body material: PC
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NIMH 600MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: φ117*23mm

Ultra Thin PC Solar Road Stud Light For Road NK-RS-Q7

2020-05-18

Body material: PC
Power supply: High efficient solar panel(5V/60mA)
Battery: Lithium battery(3.2V/500mAh)
Resistance: 15T
LED Color: White, Yellow, Blue, Red, Green
Size: 114*90*11mm

Nokin Solar Road Stud For Sale NK-RS-D1

2020-05-18

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH or lithium battery
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L104*W104*H20mm

Yellow Flashing Aluminum Raised Solar Cat Eyes Road Stud On Road NK-RS-A6

2020-05-18

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH1.2V/800MAH
Resistance: >20 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: L123*W133*H22mm+55mm

Internally Illuminated Solar Pavement Levelled Markers Studs NK-RS-X6

2020-05-18

Body material: Aluminum Alloy+PC cover
Power supply: Solar panel(Monocrystalline 2.5V /120MA)
Battery: Lithium battery 1000MAH*3.2V
Resistance: >30 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: Ф123*45mm

6 LED Embedded Solar Road Marker Light Supplier In China NK-RS-A10

2020-05-18

Body material: Cast Aluminum
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >30 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: Ф120*50mm（bottom）
Ф135*50mm（upper）

Colorful Aluminum Solar Road Stud Light For Road NK-RS-A6-2

2020-05-18

Body material: Heavy duty casting aluminium
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L129*W114*H23mm+53mm

China Aluminuim Solar Road Stud Light For Sale With Best Price NK-RS-T1

2020-05-18

Body material: Aluminum+PC
Power supply: Mono crystalline solar panel
Battery: NI-MH 1.2V/ 600mah(high temperature resistance);
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: 125*43*30mm

Colorful Glass Solar Road Stud Cheap Price in China NK-RS-A7

2020-05-18

Body material: Tempered Glass/PC
Power supply: USA Brand High Efficient Solar Panel
Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH1.2V/600MAH(high temperature resistance, made in China)
Lithum battery3.2V/500MAH(made in Japan)
Resistance: >20T
LED Color: White, Yellow, Blue, Red, Green
Size: φ112*56mm

Aluminium Solar Powered Road Studs For Sale NK-RS-A1

2020-05-15

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L104mm*W94mm*H20mm