During the summer in full direct sunlight, solar road stud can take up to 8 hours to full charge. Partial sunlight/shaded areas will extend the charging period of solar road stud. For installation of solar road stud during winter months and in cloudy conditions the charging time will be extended.
Now there are a variety of road traffic safety facilities to protect our lives, NOKIN solar road stud is one of them. NOKIN solar road stud, as the name suggests, is to guide the driver’s line of sight, prompt the road direction and obstacles by reflecting the car light. On the road, NOKIN solar road stud plays a very important role.
In many cities, solar road studs are used instead of street lamps and signs. Indeed, the use of solar road studs and road marking lines can improve the road safety performance, so as to reduce the occurrence of traffic accidents. The solar road studs are often installed near road marking lines, and the combination of the two can give drivers better sight at night and during the day.
Solar road stud NK-RS-Q7 with ultra-thin design, only 11mm thickness, reduce the impact from car or cycle. This solar road stud uses flexible solar panel and the largest solar charging area. And the solar road stud product can bear over 15 tons compression resistance. IP 68 test is passed. The thickness of this new type solar road stud is only 11mm, thinner than traditional solar road stud whose thickness is usually 20-30mm.
NOKIN has completed solar road stud production equipment, advanced solar road stud production technology and a variety of key solar road stud production equipment. NOKIN actively applies advanced and scientific means to ensure the quality of solar road stud products and produce solar road studs that meet the needs of users.
If you want to make your city full of beauty, reflective LED solar road stud is your best choice. Of course, beauty is only a subsidiary function of reflective LED solar road studs. The most important role of reflective LED solar road stud is to ensure safety, improve brightness and warn drivers.
After years of efforts, the company has been growing in the field of solar road stud. NOKIN has entered the ranks of solar road stud manufacturers, a modern lighting product. The main products include road solar road stud, courtyard solar road stud, rural solar road stud, green light source solar road stud, lawn solar road stud, buried solar road stud and led solar road stud.
There are various forms of solar road stud, and the installation position is also different. No matter what kind of solar road stud is, its basic characteristics should be considered from the following aspects: sealing, compression resistance, visibility, etc.
In hundreds of meters or even 1000 meters away, the light of solar road stud can be captured, which is a great progress of solar road stud technology. And the solar road stud does not rely on car lighting, can actively light up. Solar road stud also does not need to adjust and operate, it can automatically run in the case of insufficient light. This is an ideal road safety facility.
The first advantage of solar road stud is high strength and long durability. Solar road stud has high degree of surface hardness and slip-proof surface. Qualified solar road stud usually applies strengthen PC material or aluminum material which can bear more pressure. The second advantage of solar road stud is high lighting strength. The raise part of solar road stud is 100% reflective. The solar road stud is a light device and the most basic require of solar road stud is illumination.
And solar road studs can light from dusk to dawn even in demanding environments such as Northern European winters. Intelligent, interactive technology detects human traffic and increases illumination, then automatically powers down to a lower level to conserve energy when no movement is detected which also reduces light pollution.
Under what conditions are solar road studs widely used? As the focus of expressway construction is gradually shifting to mountainous areas and the mountainous areas with relatively backward economic development, fog often occurs in mountainous areas. Drivers are afraid to drive in the fog area, because they can not predict the linear direction of the road, which is very easy to cause traffic accidents. The solar road stud can prevent the driver’s vision from darkening and the visibility from greatly decreasing.
