The workers should wear eye catching reflective protective clothing when they are installing solar road studs on road. We must do a good job in the protection of the installation of solar road studs, when we are installing solar road studs on road.

These safety measures are to protect the personal safety of solar road stud construction personnel. Generally, there are a lot of traffic on the road, so it is impossible to close the road for a long time to install solar road stud.

The characteristics of solar road studs are strong and durable, economical and practical, high-tech environmental protection, energy conservation and emission reduction.

Solar road stud can be divided into embedded solar road stud and raised solar road stud. Domestic and foreign scholars have conducted in-depth research on the two forms of solar road stud and collected a lot of data.

The solar road stud without a shank can achieve a more stable state. Solar road studs without pin foot can be glued to the ground. Even if the solar road stud is repeatedly crushed by vehicles, it is not easy to fall off or damage. However, there are still more such solar road studs with a shank in the market.

Because the solar road stud is installed on the road surface, the solar road stud is easy to be damaged due to the rolling and impact of vehicles. The connection ability of several small screws is too weak to keep the structure of the solar road stud intact. The car pressed a few times, and the top of the solar road stud flew off.

The synchronous solar road studs is connected by wires, and the battery and circuit can be replaced. This kind of road stud is more compression resistant, more stable and longer life. 

Therefore, we must look at the solar road studs in the tunnel with a new perspective. LED tunnel guiding road studs are produced under such a background. The application of solar road stud in the tunnel can clearly outline the edge and contour of the road.

If you want to buy solar road stud or inquire any questions about the solar road studs, please feel free to contact NOKIN.

The traditional road stud has some defects, such as simple shape, only relying on the reflective film to emit light, small base volume, poor fixation performance, common materials, not resistant to rolling, reflective film can not actively emit light, poor warning effect and so on.

he solar road stud has the advantages of energy saving, environmental protection and convenient installation. With the continuous increase of the number of cars, the requirements for the pursuit of humanized signs and warning in road design are increasing.

The embedded solar road stud is powered by solar energy and can work continuously for more than 48 hours with one charge. And the use of imported solar panels, service life up to 3 ~ 5 years.