Solar road stud is composed of retroreflective material, shell, solar panel, LED, and controller. Solar road stud is a visual guidance facility with active light-emitting and passive reflective performance. It is usually used in combination with marking. Different from the traditional road stud which only relies on the reflective film to emit light, solar road stud can actively emit light by LED and reflect lights.

At the same time, the expressway area may pass through the rain and fog-prone areas. Dense fog is often a major factor in car accidents. The driving vehicles suddenly drive into the fog area, the vision becomes dark, the visibility drops sharply, the driver can’t predict the linear direction of the road, and it is very easy to cause traffic accidents.

Why do people choose solar road studs instead of traditional road studs? Why are traditional road studs being replaced by solar road studs? Not only because of the progress of science and technology but also because there are some insurmountable problems in the traditional road stud, which will cause difficulties and instability in the use of the road. While solar road stud overcomes these problems.

Today, we will introduce the product solar road stud NK-RS-C1. The performance requirements of solar road stud light-emitting devices and batteries are introduceed here. I hope our introduction to solar road stud can help you. Welcome to buy NOKIN solar road stud products.

Generally speaking, there are 6-8 LED bulbs in the solar road stud on motorway to ensure the brightness. Therefore, the solar road stud can be brighter than traditional light. Solar road stud on motorway can help to reduce accident at regional rail crossing, intersection and provide guidance and hazard warning to drivers in darkness and bad weathers.

The installation of embedded solar road stud NK-RS-X5 can be bonded with epoxy resin adhesive or nailed. The energy storage element of embedded solar road stud NK-RS-X5 is lithium iron phosphate battery 3.2v-500mah, charging and discharging times are more than 1000 times, and the capacity is not easy to decline.

This design is to prevent the solar road stud from being crushed and damaged on the road. The solar road stud K1 is also filled with epoxy resin. This is also to ensure that the interior of the solar road stud is firm and not easy to be damaged by external forces. The installation of solar road stud K1 can be bonded with epoxy resin adhesive or nailed.

One of solar road stud advantages is no dead corner reflection. Therefore, solar road stud can play a warning role in the critical section, and has 360 ° reflective guidance function for the sharp bend and critical bend road. Solar road stud also has high visibility. Therefore, solar road stud can play a guiding role in special road conditions.

Last year, the Public Security Bureau of Gaolan County, Shaanxi Province purchased a batch of embedded solar road studs from NOKIN, for the decoration and lighting of the inner corridor of the community. NOKIN are a member of the National Technical Committee for standardization of traffic engineering facilities (highways) and participate in the formulation of national industry standards.

Because synchronous solar road stud works in synchronous flashing mode, it is commonly used as road sideline, green belt sign, deceleration sign, obstacle indication, etc. The synchronous solar road stud is a very effective technical means of urban beautification, anti-fog guidance and road marking enhancement.

Solar road stud is a kind of LED road stud, which is set along the road surface, used at night or in rainy and foggy weather to indicate the direction of the road. Solar road stud is composed of retroreflective material, shell, solar panel, led and controller. It is a visual guidance device with active light and passive reflection performance. It is usually used in combination with marking.

If you want to select qualified and cheap solar road stud, you can come to consult our customer service staff. NOKIN’s solar road stud is your best choice. NOKIN is not only a solar road stud manufacturer, but also a responsible enterprise dedicated to the use of renewable energy and the promotion of world environmental protection.