Analysis of the working principle and safety advantages of solar road studs

2024-09-24

0 views times

Share us:

‌Solar road studs, also known as reflective markers or LED road stud lights, are a type of traffic safety facility that uses solar panels to charge, store energy in batteries, and automatically emit light at night or in rainy and foggy weather when there is insufficient light. Solar road studs have built-in light sensors that can automatically control the on and off of LED lights according to ambient light. During the day, solar panels absorb sunlight, convert it into electrical energy, and store it in batteries. At night or when there is insufficient light (such as at night or on cloudy days), the light sensor triggers the LED lights to light up, emitting bright light to guide vehicles to drive correctly; during the day or when there is sufficient light, the lights will automatically turn off to save energy.

Functions and Roles of Solar Road Studs

In the continuous improvement and development of the transportation system, safety has always been a core issue that cannot be ignored. On roads without street lights, especially rural roads, mountain roads, and highways, the line of sight is limited when driving at night. Nokin solar road stud can provide clear road edges or lane line guidance through LED light emission, helping drivers accurately judge lane positions and reduce the occurrence of traffic accidents. In weather conditions with poor visibility, such as rain, fog, and snow, traditional road markings may become difficult to identify. The high-brightness LED lights of solar road studs can penetrate rain, fog, or snow to provide drivers with clearer driving guidance. Solar powered road studs are often used in areas such as curves, intersections, diversion areas, speed bumps, etc. where drivers need to be reminded to slow down or drive carefully. Through lights of different colors and flashing frequencies, solar led road studs can send warning signals to remind drivers to pay attention to the road conditions ahead, such as slowing down or changing lanes. Solar powered road reflectors can be installed on lane dividers to mark the boundaries or center lines of lanes. Compared with traditional reflective road studs, solar road studs have a more obvious luminous effect, especially in the absence of other light sources or in complex road conditions, which can effectively prevent vehicles from deviating from lanes or crossing the line.

Advantages of Solar Road Studs

1. Sustainable development: One of the outstanding advantages of solar road studs is that they are completely powered by solar energy, without the need for external electricity, reducing dependence on traditional electricity, and can significantly reduce energy consumption and carbon emissions. It meets the environmental protection requirements of sustainable development and can effectively improve environmental quality, reduce resource waste, and promote the long-term development of the green economy.

2. Low installation and maintenance costs: Since solar powered road studs do not need to be connected to the power grid, the construction is very simple, reducing the cost of laying cables and long-term maintenance. Road studs usually have a sturdy shell and waterproof design, can work for a long time in harsh environments, and have low maintenance requirements.

3. Intelligent control: Nokin solar road stud can automatically open and close through built-in light sensors, eliminating the need for manual operation. This automated design enables them to work efficiently and extend battery life.

4. Strong weather resistance: Most solar led road studs are waterproof, dustproof, and pressure-resistant and can work normally under harsh climatic conditions, such as high temperatures, heavy rain, snow, and sandstorms.

With its unique working principle and significant functional characteristics, solar powered road reflectors will have a broader application prospect with the continuous advancement of science and technology and the growing demand for transportation.

Solar road studs are road safety facilities powered by solar energy. They are widely used in various roads, bridges, tunnels, and other places. They are usually installed on road markings or lane edges to guide traffic flow and improve road visibility at night and in bad weather. It plays an increasingly important role in the field of traffic safety. It not only improves road visibility and driver attention but also brings many conveniences to the management and operation of transportation facilities through energy savings, environmental protection, and intelligent control.

info@nk-roadstud.com

+86-13602600950

Previous: Solar Road Studs: the Perfect Combination of High Efficiency, Energy Saving And Road Safety

Next: Tips for choosing solar road studs: key factors to improve energy efficiency and safety

Inquiry

If you have any question or comment, please contact us without hesitation. We will reply you as soon as possible.( * is required information)

*Name:; *Email:; Phone:; Company:; Country:; *Message:

Hot Products

NOKIN Amber Raised Solar Road Stud Light For Expressway NK-RS-A6-1

2020-05-18

Body material: Aluminum(GB-ADC12)+PC(Japan Brand)
Power supply: USA Brand High Efficient Solar Panel
Battery: NI-MH1.2V/600MAH; Lithium battery3.2V/500MAH(Made in Japan);
Resistance: >30T
LED Color: White, Yellow, Blue, Red, Green
Size: L125mm*W107mm*H26+50mm

Heavy Duty Solar Road Stud For Sale NK-RS-X5

2020-05-18

Body material: Casting Aluminium alloy +PC
Power supply: 5V/80MAH Mono crystalline silicon
Battery: Lithium battery3.2V/1000MAH
Resistance: >40T(can be installed in the middle of road)
LED Color: White, Yellow, Blue, Red, Green
Size: φ125*50mm

Round PC Solar Road Stud Light NK-RS-K1

2020-05-18

Body material: PC
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NIMH 600MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: φ117*23mm

Ultra Thin PC Solar Road Stud Light For Road NK-RS-Q7

2020-05-18

Body material: PC
Power supply: High efficient solar panel(5V/60mA)
Battery: Lithium battery(3.2V/500mAh)
Resistance: 15T
LED Color: White, Yellow, Blue, Red, Green
Size: 114*90*11mm

Nokin Solar Road Stud For Sale NK-RS-D1

2020-05-18

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH or lithium battery
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L104*W104*H20mm

Yellow Flashing Aluminum Raised Solar Cat Eyes Road Stud On Road NK-RS-A6

2020-05-18

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH1.2V/800MAH
Resistance: >20 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: L123*W133*H22mm+55mm

Internally Illuminated Solar Pavement Levelled Markers Studs NK-RS-X6

2020-05-18

Body material: Aluminum Alloy+PC cover
Power supply: Solar panel(Monocrystalline 2.5V /120MA)
Battery: Lithium battery 1000MAH*3.2V
Resistance: >30 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: Ф123*45mm

6 LED Embedded Solar Road Marker Light Supplier In China NK-RS-A10

2020-05-18

Body material: Cast Aluminum
Power supply: Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >30 Tons
LED Color: White, Yellow, Blue, Red, Green
Size: Ф120*50mm（bottom）
Ф135*50mm（upper）

Colorful Aluminum Solar Road Stud Light For Road NK-RS-A6-2

2020-05-18

Body material: Heavy duty casting aluminium
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L129*W114*H23mm+53mm

China Aluminuim Solar Road Stud Light For Sale With Best Price NK-RS-T1

2020-05-18

Body material: Aluminum+PC
Power supply: Mono crystalline solar panel
Battery: NI-MH 1.2V/ 600mah(high temperature resistance);
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: 125*43*30mm

Colorful Glass Solar Road Stud Cheap Price in China NK-RS-A7

2020-05-18

Body material: Tempered Glass/PC
Power supply: USA Brand High Efficient Solar Panel
Solar panel(Monocrystalline 2.5V /0.2W)
Battery: NI-MH1.2V/600MAH(high temperature resistance, made in China)
Lithum battery3.2V/500MAH(made in Japan)
Resistance: >20T
LED Color: White, Yellow, Blue, Red, Green
Size: φ112*56mm

Aluminium Solar Powered Road Studs For Sale NK-RS-A1

2020-05-15

Body material: Hi-pressure Casting Aluminium alloy
Power supply: Solar panel(monocrystalline 2.5V/0.2W)
Battery: NI-MH 1.2V/800MAH
Resistance: >20T(static)
LED Color: White, Yellow, Blue, Red, Green
Size: L104mm*W94mm*H20mm